![]() |
![]() |
#1 |
Senior Member
Join Date: Jan 2011
Location: Oklahoma
Name: Colton
Age: 29
Posts: 247
Year: 2001
Model: Ram
Engine: 5.2 V8
|
![]()
Here is a full DIY on a plenum plate and gasket repair for a 2001 Dodge Ram. I will be adding on to this as we do things, should be done in 2 days. Here we go:
First off, take off the intake or air breather box, whichever you have. ![]() Next: disconnect battery (should've done it first...) ![]() Then remove the wiper fluid and coolant boxes along with the fan shroud and radiator. 4 bolts for the shroud and 2 for radiator. ![]() ![]() Next take the drive belt loose ![]() ![]() Then remove 4 bolts for A/C compressor (pic is after it's removed) And take loose two connectors off of it. A bracket will come out with it, it sits on top of the compressor. ![]() Move compressor to the passenger side fender ![]() Next remove the altenator (2 bolts) and 2 connecters ![]() After that remove the accessory bracket (5 bolts) one bolt is underneath a pully. Just remove the pulley and you can get to it easily. ![]() Then remove the heater hose and coolant hose. The coolant hose goes to the thermostat. ![]() Next remove the injector lines ![]() Last thing we did tonight was remove the throttle cables ![]() Will start back on it tomorrow and I'll be taking more pics all along the way so stay tuned ![]()
__________________
![]() 01 Ram 1500 - 318CI - Glasspack - Dual Magnaflow Exhaust - CAI - Blacked Out Taillights - LED Taillight Bar - Debadged - HID's - Infinity Sub - JVC KD-ADP89 - Blacked Out Wheels and more to come ![]() |
![]() |
![]() |
Bookmarks |
|
|